It can be really annoying when your DStv remote suddenly stops working or starts acting up. One common problem is the remote being stuck on the wrong TV mode, like TV2 instead of TV1. Luckily, resetting your DStv remote from TV2 to TV1 is usually a quick and easy fix that you can do yourself in just a few minutes.

To reset your DStv remote from TV2 to TV1, the most common method is to press and hold the "i" button and the "back" button (the one with the arrow pointing left) at the same time. Keep holding them until the light on the remote flashes. This should switch your remote back to TV1 mode. If that doesn’t work, you might need to try a full reset of your remote.

How to Reset Your DStv Remote

If switching from TV2 to TV1 didn’t solve the problem, a full reset might be what you need. I remember one time my remote was completely unresponsive, and I thought I’d have to buy a new one. A friend told me to try taking the batteries out, pressing and holding the power button for a few seconds to drain any remaining power, and then putting the batteries back in. It worked like a charm!

Here's a simple step-by-step guide to resetting your DStv remote:

1. Remove the batteries: Open the battery cover on the back of your remote and take out the batteries.

2. Drain the power: Press and hold the power button on the remote for about 10-15 seconds. This will clear any lingering power and memory from the remote.

3. Re-insert the batteries: Put the batteries back in, making sure they are inserted correctly.

4. Test the remote: Try using the remote to see if the issue is resolved.

Sometimes, the problem isn’t with the remote itself but with the decoder. If your remote still isn’t working after a reset, you might want to try resetting your DStv decoder. For more information on how to do that, you can check out our article on how to reset my DStv decoder.

I once had an issue where my remote would only work if I was standing right in front of the decoder. I tried everything, and it turned out the batteries were just weak. It’s always a good idea to try a fresh pair of batteries before you do anything else. It could save you a lot of time and hassle.

If you’ve tried all of these steps and your remote is still not working, it might be time to get a new one. Before you spend any money, though, why not try earning a voucher to cover the cost? With the Points Castle app, you can earn points by completing surveys and playing games, which you can then redeem for vouchers for stores like Takealot, where you can buy a new DStv remote.